SJX Electric Vertical Test Stand

Model: SJX-1KVL (SP)
Units in Stock: 0
Added on: Friday 11 April, 2014

Share |

Quantity:

SJX electric vertical test stand is tensile/compressive test stand especially designed to match SN/SH/SP series push pull gauges. With double guide rod, the test stand has good stability, wide application range and convenient to use. It has nopolar timing, digital display the testing speed, converting mode between manual operation and automatic. It is specialized for various tension/compression, insertion/withdraw, fatigue test and fracture test.

SJX-500V

  1. Dimension: L W H (mm) 430 245 570mm; Weight: about 24.2kg; Stroke: 250mm;
  2. Testing Speed: 50-245mm/min, max load: 200N; 250-500mm/min, max load: 500N;
  3. Applied with (purchase additionally): SN SH /SP Inside push pull gauge, various clamps.

SJX-1KV

  1. Dimension: L W H (mm) 410 270 970mm; Weight: about 31.5kg; Stroke: 520mm;
  2. Testing Speed: 50-245mm/min, max load: 500N; 250-500mm/min, max load: 1000N;
  3. Applied with (purchase additionally): SN SH /SP 2N-1KN push pull gauge, various clamps.

SJX-2KV

  1. Dimension: L W H (mm) 465 310 1180mm; Weight: about 52.1kg; Stroke: 600mm;
  2. Testing Speed: 50-500mm/min, max load: 2000N;
  3. Applied with (purchase additionally): SN SH /SP 2N-2KN push pull gauge, various clamps.

SJX-1KVL

  1. Dimension: L W H (mm) 380 285 1490mm; Weight: about 57.0kg; Stroke: 1000mm;
  2. Testing Speed: 50-500mm/min, max load: 1000N;
  3. Applied with (purchase additionally): SN SH /SP 2N-1KN push pull gauge, various clamps.