BH-2000 - Glue Dispenser(Timer control by volume)

Model: BH-2000 Glue Dispenser
Units in Stock: 10
Added on: Tuesday 30 December, 2008

Share |

Quantity:

Performance

  • precision glue-dripping machine uses air pressure within set time to push out liquid, using a timer to control each dripping time. If the air pressure and time are well adjusted and the nozzles are properly chosen, it can easily change each dripping volume. It has extensive uses, and applicable liquids include non-drying adhesive, red glue, yellow glue, epoxy resin, silica gel, lubricants, screw-tightening glue, anti-soldering solvent or tin paste and so on. The full set of products is available, provided with straight-type steel pipe nozzle and sharp-type plastic needle nozzle to make full use of the machine functions.

Model

BH-2000 & BH-2000AT

Auto Set Time

For 0.01 ~ 30 Sec.

Timing

Artificial sustained pedal (line painting) or Single-touch plastic tap

Minimum Note Volume Drops

0.01 ml.

Repeat Accuracy

0.50%

Input Barometric Pressure

0.25 ~ 7 bar (35 ~ 100 psi)

Input Barometric Pressure

0.1 ~ 5.5 bar (1 ~ 78 psi)

Input Voltage

220V or 110V (can select at back side)

Dimension / Weight

235 mm x 225 mm x 633 mm / 2.2 kg.

BH_2000___AT___Glue_Dispenser1.jpg